Morphy Richards 40730 Bedienungsanleitung PDF herunterladen (Seite 3)

FILLING

1 Make sure that the iron is not

lugged in, then set the steam to

ry iron selector switch

⁄ t

he ‘0’ position before filling the iron

with water.

2 L

ift up the filler cap and fill the tank

‡ with water through the filling hole

‰, using the beaker provided

(300ml).

A Â After filling replace

he filler cap. In hard water areas

the use of distilled or demineralised

ater is recommended.

WARNING: Never use battery

topping up fluid or water

containing any substances like

starch, or sugar, or defrosted

water from a refrigerator.

Always pour out the remaining

water after use.

WARNING: When filling your iron

with tap water always use the

beaker provided. Never fill

directly under the tap.

TEMPERATURE

CONTROL

Plug in the iron and switch on. Set

the temperature control dial

¤ to

the temperature required, but don’t

start ironing immediately.

If you wait a few minutes, the iron

will stabilise at the required setting.

Your Morphy Richards iron is fitted

with an indicator light

ﬂ which will

go on and off while you are ironing.

This is perfectly normal as it shows

that the iron is maintaining the heat

setting you have chosen.

It is always a good idea to begin

with cool fabrics and work up to

higher settings.

An iron heats up quicker than it

cools down so you’ll save time and

electricity.

FEATURES OF YOUR

IRON

Temperature indicator

light

The indicator light ﬂ shows that

he iron is warming up. When the

required temperature is reached the

light will go out and will cycle on-off

during operation.

Dry ironing

You can use your iron as a dry iron

only. Make sure the steam to dry

iron selector switch

⁄ is set to the

symbol.

Any temperature setting may be

used depending on the garment.

The spray feature may be used

provided there is water in the tank

(see filling section). You do not need

to put any water in the tank when

dry ironing only.

Spray

Press the spray button › and aim

the spray of water at stubborn

creases. You can do this whilst dry

ironing providing there is water in

the tank. When using the water

spray it may be necessary to push

the button a few times to get the

spray pump primed.

Automatic variable

steam

Fill the iron with water as described

in the filling section, and insert the

plug into the electrical socket.

1 Set the steam to dry iron selector

switch to steam.

2 Select the temperature required by

turning the temperature control dial

¤ to the desired setting. The

amount of steam required is

automatically selected and is

displayed in window

‹.

ess the shot of steam button

ﬁ

to obtain a burst of extra steam for

oning out cr

eases in heavy

material such as denim.

Getting the best from your

new iron....

Safety first

Caution must be used when

handling this appliance as it does

get very hot. Always switch off the

unit and allow to cool before

cleaning or storing.

Self cleaning button

Your iron will give the best ironing

results and will last longer if you use

the self clean feature at least once a

month.

COMPONENTS OF

YOUR IRON

⁄ Steam to dry iron selector switch

¤ Temperature control dial

‹ Steam level indicator window

› Spray button

ﬁ Shot of steam button

ﬂ Temperature indicator light

‡ Water tank

(illuminated certain models)

· Soleplate

‚ Self-clean button

„ Spray nozzle

‰ Filling hole with cap

Â Filler cup (300ml)

BEFORE USE

Sort out the items to be ironed

according to the type of fabric. This

will minimise the frequency of

temperature adjustment for different

garments.

Note: The steam facility should only

be used on garments which are

suitable for ironing at the 2 and 3

dot settings.

Textiles and clothes are supposed

to carry ironing instructions. If they

don’t you should follow the fabric

guide on page 3, but be sure to test

the temperature by ironing the hem

of the garment or similar area first.

If you turn the control dial down

from a hot setting to a cooler

setting, wait until the iron

temperature has stabilised before

you continue ironing.

Delicate fabrics such as silk,

wool,velour, etc, are best ironed

with an ironing cloth to prevent

shine marks.

ﬂ

‡

‚

„

‰

⁄

‹

›

ﬁ

350

300

1 2 3 4 5 6 7 8 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Morphy Richards 40730 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eisen Morphy Richards 40730